Analysis and Design of the Bow Tie Antenna by Using Ground Slotting
DOI:
https://doi.org/10.37628/jrfd.v4i1.723Abstract
A bow tie antenna is made from bi-triangular sheet of metal. It is used for all UWB applications like Wi-Fi, ground penetrating radar, wireless, and microwave imaging applications. The performance characteristic parameters (return loss, VSWR, and gain) of proposed design have been portrayed and analyzed to show the performance of antenna. The results confirmed that the proposed antennas may be useful for different mobile communication systems and wireless applications. The results showed sufficient isolation among the operating frequency bands with design antenna is 5 GHz. CST simulation tool is used to provide platform for simulating the proposed design improvement in gain and the overall maximum gain of 5.17 dB is obtained at 13.32 GHz.References
N. Zhu, R.W. Ziolkowski. Progress toward THz antenna designs with high directivity and high efficiency, In: Proc. IEEE Antennas Propagat. Soc. Int. Symp., Orlando, FL, USA, 2013, 2271–2p.
H. Liu, H. Jiang, X. Guan. Single-feed slotted bowtie antenna for triband applications, Anten Wirel Propagat Lett. 2013; 12: 1658–61p.
U.S. Patent No. 3713 162 (1973), invs.: E. Munson. “Single slot cavity antennas assembly.
H.D. Weinschel. Progress Report on Development of Microstrip Cylindrical Arrays for Sounding Rockets. Physics and Science Lab., New Mexico State Univ, Las Cruces; 1973.
K. Buell, H. Mosallaei, K. Sarabandi. A substrate for small patch antennas providing tunable miniaturization factor, IEEE Trans Microwave Theory Tech. 2006; 54: 135–9p.
D.M. Pozar. Microwave Engineering. Wiley Inter-science; 2006.
R. Chair, C.L. Mak, K.F. Lee, K.M. Luk, A.A. Kishk. Miniature wide-band half U-slot and half E-shaped patch antennas, IEEE Trans Anten Propag. 2005; 53: 2645–52p.
H. Nakano, K. Vichien. Dual-frequency patch antenna with a rectangular Notch, Electron Lett. 1989; 25(16): 1067–8p.
S. Arya, S. Khan, C. Shan, P.K. Lehana. Design of a microstrip patch antenna for mobile wireless communication systems, J Comput Intell Electron Syst. 2012; 1(2): 178–82p.
A. Aslam, F.A. Bhatti. Matching technique for microstrip patch antenna using GCPW feed, Int Conf Emerg Technol. 2009, 66–9p.
R. Arora, A. Kumar, S. Khan, S. Arya. Finite element modeling and design of rectangular patch antenna with different feeding techniques, Open J Anten Propag. 2013; 1(1).
