Online Server Based Monitor and Control of Industrial System Using PID with Coding

Authors

  • Atif A. Sorathia Department of Electrical Engineering, Dr. Subhash Technical Campus, Junagadh, Gujarat, India
  • Vishal R. Vandra Department of Electrical Engineering, Dr. Subhash Technical Campus, Junagadh, Gujarat, India
  • Dileep M. Makwana Department of Electrical Engineering, Dr. Subhash Technical Campus, Junagadh, Gujarat, India
  • Maulik V. Shingala Department of Electrical Engineering, Dr. Subhash Technical Campus, Junagadh, Gujarat, India
  • Chetan B. Bambhroliya Department of Electrical Engineering, Dr. Subhash Technical Campus, Junagadh, Gujarat, India

DOI:

https://doi.org/10.37628/ijepst.v5i1.1030

Abstract

In this system having heater mechanism with thermocouple, thermocouple will sense the temperature and will give the data to delta controller (after analog to digital conversion). After that, digital controller passes the data to PLC controller through RS-485. PLC programming will result in when temperature is low, heater will start and buzzer blows when limit exceeds, as well as when temperature is low, the heater will start again and the cycle will repeat from program loaded in PLC. Keywords: PID, PLC controller, RS-485, SCADA, thermocouple

Downloads

Published

2019-08-07

Issue

Vol. 5 No. 1 (2019)

Section

Articles