ENERGY EFFICIENT LOW-VOLTAGE DYNAMIC COMPARATOR
Abstract
Full Text:
PDFReferences
B. Goll and H. Zimmermann, “A comparator with reduced delay time in 65-nm CMOS for supply voltages down to 0.65,” IEEE Trans. Circuits Syst. II, Exp. Briefs, vol. 56, no. 11, pp. 810–814, Nov. 2009.
S. U. Ay, “A sub-1 volt 10-bit supply boosted SAR ADC design in standard CMOS,” Int. J. Analog Integr. Circuits Signal Process., vol. 66, no. 2, pp. 213–221, Feb. 2011.
A. Mesgarani, M. N. Alam, F. Z. Nelson, and S. U. Ay, “Supply
boosting technique for designing very low-voltage mixed-signal circuits in standard CMOS,” in Proc. IEEE Int. Midwest Symp. Circuits Syst. Dig. Tech. Papers, Aug. 2010, pp. 893–896.
B. J. Blalock, “Body-driving as a Low-Voltage Analog Design Technique for CMOS technology,” in Proc. IEEE Southwest Symp. Mixed-Signal Design, Feb. 2000, pp. 113–118.
M. Maymandi-Nejad and M. Sachdev, “1-bit quantiser with rail to rail input range for sub-1V __ modulators,” IEEE Electron. Lett., vol. 39, no. 12, pp. 894–895, Jan. 2003.
Y. Okaniwa, H. Tamura, M. Kibune, D. Yamazaki, T.-S. Cheung, J. Ogawa, N. Tzartzanis, W. W. Walker, and T. Kuroda, “A 40Gb/ s CMOS clocked comparator with bandwidth modulation technique,” IEEE J. Solid-State Circuits, vol. 40, no. 8, pp. 1680–1687, Aug. 2005.
B. Goll and H. Zimmermann, “A 0.12 μm CMOS comparator requiring 0.5V at 600MHz and 1.5V at 6 GHz,” in Proc. IEEE Int. Solid-State Circuits Conf., Dig. Tech. Papers, Feb. 2007, pp. 316–317.
B. Goll and H. Zimmermann, “A 65nm CMOS comparator with modified latch to achieve 7GHz/1.3mW at 1.2V and 700MHz/47μW at 0.6V,” in Proc. IEEE Int. Solid-State Circuits Conf. Dig. Tech. Papers, Feb. 2009, pp. 328–329.
B. Goll and H. Zimmermann, “Low-power 600MHz comparator for
5 V supply voltage in 0.12 μm CMOS,” IEEE Electron. Lett., vol. 43,
no. 7, pp. 388–390, Mar. 2007.
D. Shinkel, E. Mensink, E. Klumperink, E. van Tuijl, and B. Nauta, “A double-tail latch-type voltage sense amplifier with 18ps Setup+Hold time,” in Proc. IEEE Int. Solid-State Circuits Conf., Dig. Tech. Papers, Feb. 2007, pp. 314–315.
P. Nuzzo, F. D. Bernardinis, P. Terreni, and G. Van der Plas, “Noise analysis of regenerative comparators for reconfigurable ADC architectures,” IEEE Trans. Circuits Syst. I, Reg. Papers, vol. 55, no. 6, pp. 1441–1454, Jul. 2008.
A. Nikoozadeh and B. Murmann, “An analysis of latched comaprator offset due to load capacitor mismatch,” IEEE Trans. Circuits Syst. II, Exp. Briefs, vol. 53, no. 12, pp. 1398–1402, Dec. 2006.
S. Babayan-Mashhadi and R. Lotfi, “An offset cancellation technique for comparators using body-voltage trimming,” Int. J. Analog Integr. Circuits Signal Process., vol. 73, no. 3, pp. 673–682, Dec. 2012.
J. He, S. Zhan, D. Chen, and R. J. Geiger, “Analyses of static and
dynamic random offset voltages in dynamic comparators,” IEEE Trans.
Circuits Syst. I, Reg. Papers, vol. 56, no. 5, pp. 911–919, May 2009.
J. Kim, B. S. Leibowits, J. Ren, and C. J. Madden, “Simulation and analysis of random decision errors in clocked comparators,” IEEE Trans. Circuits Syst. I, Reg. Papers, vol. 56, no. 8, pp. 1844–1857, Aug. 2009.
P. M. Figueiredo and J. C. Vital, “Kickback noise reduction technique for CMOS latched comapartors,” IEEE Trans. Circuits Syst. II, Exp. Briefs, vol. 53, no. 7, pp. 541–545, Jul. 2006.
B. Wicht, T. Nirschl, and D. Schmitt-Landsiedel, “Yield and speed
optimization of a latch-type voltage sense amplifier,” IEEE J. Solid-State Circuits, vol. 39, no. 7, pp. 1148–1158, Jul. 2004.
D. Johns and K. Martin, Analog Integrated Circuit Design, New York, USA: Wiley, 1997.
DOI: https://doi.org/10.37628/jvdt.v2i2.317
Refbacks
- There are currently no refbacks.