Open Access Open Access  Restricted Access Subscription or Fee Access

A Novel Patch Rectangular Rectenna using Flexible Leather Substrate

Raghav Aggarwal, Pramod Sharma

Abstract


This paper managing recreation a legitimate receiving wire plan for RF energy collecting. The energy gathering advances are rising progressively in the new years as a result of impediment by energy capacity and wired power supply. In the last energy many years' energy produced from outside sources like sun oriented power, wind energy, and RF energy utilized in the highlights purposes to gives limitless energy to the life expectancy of electronic machines, the energy collecting are endless sources in light of the fact that the climate around us is filled everyday with various radio transmissions from ground stations or through portable pinnacles. This paper centers around RF energy reaping over 2.45 GHz that is which emanating from the Wi-Fi band. The getting receiving wire getting the radio transmission that in the RF range (2.45 GHz) from the open space, which transforms it from an electromagnetic wave to a signal for exchanging, which is then converted into DC voltage by a rectifier so that the voltage can be stored internally battery or might be taking care of the heap straightforwardly, the place of radio wire is most significant, at the end of the day the field strength is greater close to the earth station than it is farther away. The semiconductor Schottky diode model SMS 7630-005LF is chosen in this study due to its exceptionally rapid exchanging activity and low forward voltage of (0.15-0.45) V.


Full Text:

PDF

References


Vijay Kumar Prajapati and Pramod Sharma, "Analysis of Path loss exponent and shadowing on beam antenna calculating diversity and sensitivity for case scenario", IJSDR, Vol. 5(10), pp. 319- 327, Oct-2020.

B. Ananth Kumar and Pramod Sharma," A Survey on Smart Car Design", JETIR, Vol. 6(5), pp. 286-289, May-2019.

Raghav Agrawal, Pramod Sharma and Anurag Saxena,"A Diamond cut Leather Substrate Antenna for BAN (Body Area Network) Application, Emerging Materials and Advanced Designs for Wearable Antennas, IGI Global (Book Chapter), Januray-2021.

Khaleel, H.R. (Ed.) Innovation in Wearable and Flexible Antennas; Wit Press: Southampton, UK;Billerica, MA, USA, 2015.

Tao, Y.; Tao, Y.; Wang, L.; Wang, B.; Yang, Z.; Tai, Y. High reproducibility, flexible conductive patterns fabricated with silver nanowire by drop or fit-to-flow method. Nanoscale Res. Lett. 2013,8, 147.

Bodö, P.; Sundgren, J.-E. Titanium deposition onto ion-bombarded and plasma- treated polydimethylsiloxane: Surface modification, interface and adhesion. Thin Solid Films 1986, 136, 147–159.

Saha, T.K.; Knaus, T.N.; Khosla, A.; Sekhar, P.K. A CPW-fed flexible UWB antenna for IoT applications. Microsyst. Technol. 2018.

Y. S. S. Hamid Jabbar, “RF Energy Harvesting System and Circuits for Charging of Mobile Devices,” IEEE Trans. Consum. Electron., vol. 56, no. 1, pp. 247–253, 2010.

Zbitou, J., Latrach, M., & Toutain, S. “Hybrid rectenna and monolithic integrated zero-bias microwave rectifier”. IEEE Transactions on Microwave Theory and Techniques, vol. 54, no.1, pp. 147-152, 2006.

Johnston, I.D.; McCluskey, D.K.; Tan, C.K.L.; Tracey, M.C. Mechanical characterization of bulk Sylgard 184 for microfluidics and microengineering. J. Micromech. Microeng. 2014, 24, 035017.

[CrossRef]

Yijun, Z.; Bayram, Y.; Feng, D.; Liming, D.; Volakis, J.L. Polymer-Carbon Nanotube Sheets for Conformal Load Bearing Antennas. IEEE Trans. Antennas Propag. 2010, 58, 2169–2175.

[CrossRef]

Trajkovikj, J.; Zurcher, J.-F.; Skrivervik, A.K. PDMS, A Robust Casing for Flexible W-BAN Antennas [EurAAP Corner]. IEEE Antennas Propag. Mag. 2013, 55, 287– 297. [CrossRef]

Huang, G.-W.; Xiao, H.-M.; Fu, S.-Y. Wearable Electronics of SilverNanowire/Poly(dimethylsiloxane) Nanocomposite for Smart Clothing. Sci. Rep. 2015, 5, 13971.

Hayes, G.J.; Ju-Hee, S.; Qusba, A.; Dickey, M.D.; Lazzi, G. Flexible Liquid Metal Alloy (EGaIn) Microstrip Patch Antenna. IEEE Trans. Antennas Propag. 2012, 60, 2151–2156.

Pacchini, S.; Cometto, M.; Chok, J.J.; Dufour, G.; Tiercelin, N.; Pernod, P.; Kang, T.B.; Coquet, P. Inkjet-printing of hybrid Ag/conductive polymer towards strechable microwave devices. In

Proceedings of the 2015 European Microwave Conference (EuMC), Paris, France, 7–10 September 2015; IEEE: Paris, France, 2015; pp. 865– 868.


Refbacks

  • There are currently no refbacks.