AC/DC Electric Motor Drives and Methods of Controlling Speed
Abstract
Abstract:
Electric drive is an electromechanical framework (mechatronic framework) expected to set into movement
mechanical hardware. It comprises of an electric engine (engines), an exchange component, an electrical
vitality converter, and a control framework. The control framework comprises of a microcontroller with
information association interfaces, information channels (information organize), sensors and actuators. A
summed up structure of the electric drive is appeared in. All in all, the fundamental errand of the electric
drive is the movement control of instruments. An electric drive is a programmed control framework with
various criticisms where diverse programmed control standards, for example, mistake driven input control,
model based control, sensible parallel control, or fluffy rationale control techniques, are utilized. Contingent
upon a specific specialized arrangement and chose control guideline, various sensors for estimating of
flows, voltages, speed, increasing speed, torque and so forth in an electric drive are utilized. Other data,
similar to pressure signal for controlling siphons and blowers, air mugginess as well as temperature signal
for controlling of fans and so forth is likewise fundamental. Consequently, the controller of the drive must
process distinctive data.
Keywords: AC, Blowers, Controllers controlling siphons DC, Drives.
Full Text:
PDFReferences
References:
Imoru.O, Tsado.J: Modeling of Electronically Commutated (Brushless DC ) Motor Drives with
Back–Emf Sensing, Proceedings of the IEEE International Conferences on Machine design, China,
pp 828-831, June 2012.
Chung.P, Leo.N: Transient Performance Based Design Optimization of PM Brushless DC motor
Drive Speed Controller, Proceeding of the IEEE International Conference on Electrical System,
Singapore, pp-881-886, June, 2005.
Ogata K., Modern Control Engineeering , 5th ed., Prentice Hall, NJ, 2012.
Kuo B.C.: Automatic Control System, 6th ed., Prentice Hall, NJ, 1991.
Petar Cmosija, Ramu krishnant, Toni Bjazic.: Optimization of PM Brushless DC Motor Drive speed
controller using Modification of Ziegler-Nicholas Methods based on Bode-plots EPE-PEMC,
Proceeding of the IEEE international conference on Power Electronics, Slovenia, pp 343-348,2006.
Krishnan.T, Ramaswami.B: Speed control of D.C Motor using thyristor dual converter, IEEE
transacations on industrial electronics and control instrumentation , vol. IECI-23, no. 4, November
Lord.W, Hwang.J: DC servomotors modeling and parameter determination, IEEE Trans. Industrial
Application , vol. IA-3, pp. 234-243, May/ June, 1973.
Md Mustafa kamal, Dr. Lini Mathew, Dr. S. Chaterji: speed control of DC motor using FUZZY based
controller, IEEE Students’ Conference on Electrical , Electronics and Computer science. 2014
Saab.S, Abi Kaed –Bey.R: Paramter identification of a DC motor : an experimental approach, IEEE
Trans. On Electronics, Circuits and System, Vol.2, pp. 981-984,2001.
Shashi Bhushan Kumar, Mohammed Hasmat Ali*, Anshu Sinha, “Design and Simulation of Speed Control of
DC Motor by Artificial Neural Network Technique” International Journal of Scientific and Research
Publications, Volume 4, Issue 7, July 2014.
G.SUDHA1, “Performance Based Comparison Between Various Z-N Tuninng PID And Fuzzy Logic PID
Controller In Position Control System Of Dc”, International Journal on Soft Computing (IJSC) Vol.3, No.3,
August 2012.
Manoj Kushwah1 and Prof. Ashis Patra2, “Tuning PID Controller for Speed Control of DC Motor Using Soft
Computing Techniques-A Review” Advance in Electronic and Electric Engineering, Volume 4, Number 2
(2014), pp. 141-148.
J. C. Basilio and S. R. Matos, ”Design of PI and PID Controllers With Transient Performance Specification”, ,”
IEEE Trans. Education, vol. 45, Issue No. 4, 2002, pp. 364- 370
Aditya Pratap Singh, “Speed Control of DC Motor using PID Controller Based on Matlab” International
Conference on Recent Trends in Applied Sciences with Engineering Applications, Vol.4, No.6, 2013.
Rahul Malhotra1, Narinder Singh2, Yaduvir Singh3, “SOFT COMPUTING TECHNIQUES FOR PROCESS
CONTROL APPLICATIONS” International Journal on Soft Computing (IJSC), Vol.2, No.3, August 2011.
Md Akram Ahmad, Pankaj Rai, “Speed control of a DC motor using Controllers” Automation, Control and
Intelligent Systems,2014; 2(6-1): 1-9
Ramesh Chandra Chourasia, Mukesh Kumar, “Speed Control of S.E.D.C. Motor by Using Pi and Fuzzy Logic
Kapinjay Ucharia, Himmat Singh, “International Journal of Scientific Engineering and Technology” Volume
No.3 Issue No.3, pp : 235 – 239 1 March 2014.
Aditya Pratap Singh, “Speed Control of DC Motor using Pid Controller Based on Matlab” Innovative Systems
Design and Engineering, Vol.4, No.6, 2013 - Selected from International Conference on Recent Trends in
Applied Sciences with Engineering Applications.
P. M. Meshram, Rohit G. Kanojiya “Tuning of PID Controller using Ziegler-Nichols Method for Speed Control
of DC Motor” IEEE- International Conference On Advances In Engineering, Science And Management
(ICAESM -2012) March 30, 31,2012 117.
Bhaskar Lodh , “Simulink Based Model for Analysing the Ziegler – Nichols Tuning Algorithm as applied on
Speed Control of DC Motor”, International Journal of Advanced Research in Electrical, Electronics and
Instrumentation Engineering, Vol. 3, Issue 1, January 2014. [15] K.J. Astrom,T.Hagglund “Revisiting the
Ziegler– Nichols step response method for PID control”, www.elsevier.com/locate/jprocont, Journal of Process
Control 14 (2004) 635–650 .
Neerparaj Rai#1, Bijay Rai#2, “Neural Network based Closed loop Speed Control of DC Motor using Arduino
Uno.” International Journal of Engineering Trends and Technology- Volume4Issue2- 2013.
Choi Y. K., Lee S. K., Kay Y.C., Design and Implementation of an Adaptive Neural Network Compensator for
Control Systems, IEEE Transactions on Industrial Electronics, vol 48, April 2001.
Snehashish Bhattacharjee1, Samarjeet Borah2, “A Survey on the Application of Fuzzy Logic Controller on DC
Motor” International Journal of Application or Innovation in Engineering & Management (IJAIEM), Volume 2,
Issue 6, June 2013
Aman Kumar Singh1 , Ashis Patra2, “Speed control of a DC Motor Using PID controller, FUZZY logic
controller and GA based PID Controller” International Journal of Modern Trends in Engineering and Research
(IJMTER) Volume 0X, Issue 0Y, [Month – 2015]ISSN (Online):2349– 9745 ; ISSN (Print):2393-8161.
Nader Jamali Sufi Amlashi “Design andImplementation of Fuzzy Position Control System for Tracking
Applications and Performance Comparisonwith Conventional PID” IAES International Journalof Artificial
Intelligence (IJ-AI) Vol. 1, No. 1, March2012, pp. 31 - 44 ISSN: 2252-8938.
Aamir Hashim and Obeid Ahmed, “Optimal Speed Control for Direct Current Motors Using Linear Quadratic
Regulator”, Journal of Science and Technology Engineering and Computer Sciences, vol. 13, no. 2, 2012.
Vinodh Kumar and Jovitha Jeromeb, “LQR Based Optimal Tuning of PID Controller for Trajectory Tracking
of Magnetic Levitation System”, Jerome / Procedia Engineering, vol. 4, no. 3, pp. 635-650, 2011.
Aamir Hashim and Obeid Ahmed, “Optimal Speed Control for Direct Current Motors Using Linear Quadratic
Regulator”, Journal of Science and Technology Engineering and Computer Sciences, vol. 14, no. 3, 2013.
Controller” International Journal of Soft Computing and Engineering (IJSCE),Volume-3, Issue-2, May 2013.
J. C. Basilio and S. R. Matos, ”Design of PI and PID Controllers With Transient Performance Specification”, ,”
IEEE Trans. Education, vol. 45, Issue No. 4, 2002, pp. 364- 370.
Shashi Bhushan Kumar, Mohammed Hasmat Ali*, Anshu Sinha, “Design and Simulation of Speed Control of
DC Motor by Artificial Neural Network Technique” International Journal of Scientific and Research
Publications, Volume 4, Issue 7, July 2014.
DOI: https://doi.org/10.37628/ijaic.v6i1.1342
Refbacks
- There are currently no refbacks.