Comparison of Different Topologies for Design of CMOS LNA
DOI:
https://doi.org/10.37628/jscrs.v3i2.1771Abstract
This paper deals with the design of a low noise amplifier for ultra-wideband (UWB) frequency range from 3.1 to 5 GHz considered various parameters which affects its performance and efficiency of subsequent devices that follows. Also, we have specified the value and conditions under which each of the components works. This will lead to better gain, noise figure, power consumption, etc. In this paper, we have simulated the proposed circuits on advanced design system (ADS) tool and achieved better values for gain and noise figure with low power consumption. The scope of the paper is to minimize the noise figure and enhance the gain.References
Y.L. Wei, J.D. Jin. A low power low noise amplifier for K-band
applications, IEEE Microw Wirel Compon Lett. 2009; 19(2): 116–8p.
A. Meaamar, B.C. Chye, M. Anh, Y.K. Seng. A 3 to 8 GHz low noise
CMOS amplifier, IEEE Microw Wirel Compon Lett. 2009; 19(4):
–7p.
R. Kumar, M. Kumar, V.M. Srivastava. Design and noise optimization for a RF low noise amplifier, Int J VLSI Des Commun
Syst. 2012; 3(2): 165–73p.
N.E. Farid, A. Marzuki, A. Ismat. A variable gain 2.5 GHz CMOS low noise amplifier for mobile wireless communications, In: Proc. of 9th IEEE Int. Conf. of Communications.Malaysia, 15–17 Dec. 2009, 885–9p.
W. Guo, D. Huang. The noise and linearity optimization for 1.9 GHz
CMOS low Noise Amplifier, In:Proc. of IEEE Asia Pacific Conf. on
ASIC. Taiwan, 6–8 Aug. 2002, 253–7p.
M. Anowar Masud, H. Zirah, M.Kelly. A 45 dB variable gain low
noise MMIC amplifier, In:Proceedings of GAAS Symposium.Paris, 2005, 669–72p