Quadcopter Manufactured by Using 3D Printing

Authors

  • B. Mabu Sarif Assistant Professor, Department of Mechanical, Bhuma Shobha Nagireddy Memorial College of Engineering and Technology, Allagadda, Andhra Pradesh, India
  • S. Nayabu Rasool Assistant Professor, Department of Mechanical, Bhuma Shobha Nagireddy Memorial College of Engineering and Technology, Allagadda, Andhra Pradesh, India
  • V. Venkatesh UG Students, Department of Mechanical, Bhuma Shobha Nagireddy Memorial College of Engineering and Technology, Allagadda, Andhra Pradesh, India
  • K. Dastagiri UG Students, Department of Mechanical, Bhuma Shobha Nagireddy Memorial College of Engineering and Technology, Allagadda, Andhra Pradesh, India
  • P. Madhusudarshan UG Students, Department of Mechanical, Bhuma Shobha Nagireddy Memorial College of Engineering and Technology, Allagadda, Andhra Pradesh, India
  • S. Md. Irshad UG Students, Department of Mechanical, Bhuma Shobha Nagireddy Memorial College of Engineering and Technology, Allagadda, Andhra Pradesh, India
  • R.V. Bharath Kumar Reddy UG Students, Department of Mechanical, Bhuma Shobha Nagireddy Memorial College of Engineering and Technology, Allagadda, Andhra Pradesh, India

DOI:

https://doi.org/10.37591/jscrs.v6i1.1262

Abstract

ABSTRACT
From the past few years, drone or quadcopters are became an integral part of life. A drone lifted and propelled by four rotors. Classic controllers have been used for stabilization and navigation to control quadcopters, but it requires considerable effect to design and tune their parameters for not getting any difficulties while flying. Here the whole quadcopter is manufactured by using 3D printing, with multiple colors. A quadcopter with four propellers is used for takeoff/landing in limited space. UAV have become most important thing in doing some purposes like security, building inspection, entertainment, and for other tasks. Inertial navigations systems are one of the important areas of research for UAVs to control their flights through buildings or near constructions where flight paths must be controlled or recorded.

Keywords: Arduino, motors, camera

Cite this Article: B. Mabu Sarif, S. Nayabu Rasool, V. Venkatesh, K. Dastagiri, P. Madhusudarshan, S. Md. Irshad, R.V. Bharath Kumar Reddy. Quadcopter Manufactured by Using 3D Printing. International Journal of Satellite Communication & Remote Sensing. 2020; 6(1): 29–34p.

Author Biographies

  • B. Mabu Sarif, Assistant Professor, Department of Mechanical, Bhuma Shobha Nagireddy Memorial College of Engineering and Technology, Allagadda, Andhra Pradesh, India
    Assistant Professor, Department of Mechanical, Bhuma Shobha Nagireddy Memorial College of Engineering and Technology, Allagadda, Andhra Pradesh, India
  • S. Nayabu Rasool, Assistant Professor, Department of Mechanical, Bhuma Shobha Nagireddy Memorial College of Engineering and Technology, Allagadda, Andhra Pradesh, India
    Assistant Professor, Department of Mechanical, Bhuma Shobha Nagireddy Memorial College of Engineering and Technology, Allagadda, Andhra Pradesh, India
  • V. Venkatesh, UG Students, Department of Mechanical, Bhuma Shobha Nagireddy Memorial College of Engineering and Technology, Allagadda, Andhra Pradesh, India
    UG Students, Department of Mechanical, Bhuma Shobha Nagireddy Memorial College of Engineering and Technology, Allagadda, Andhra Pradesh, India
  • K. Dastagiri, UG Students, Department of Mechanical, Bhuma Shobha Nagireddy Memorial College of Engineering and Technology, Allagadda, Andhra Pradesh, India
    UG Students, Department of Mechanical, Bhuma Shobha Nagireddy Memorial College of Engineering and Technology, Allagadda, Andhra Pradesh, India
  • P. Madhusudarshan, UG Students, Department of Mechanical, Bhuma Shobha Nagireddy Memorial College of Engineering and Technology, Allagadda, Andhra Pradesh, India
    UG Students, Department of Mechanical, Bhuma Shobha Nagireddy Memorial College of Engineering and Technology, Allagadda, Andhra Pradesh, India
  • S. Md. Irshad, UG Students, Department of Mechanical, Bhuma Shobha Nagireddy Memorial College of Engineering and Technology, Allagadda, Andhra Pradesh, India
    UG Students, Department of Mechanical, Bhuma Shobha Nagireddy Memorial College of Engineering and Technology, Allagadda, Andhra Pradesh, India
  • R.V. Bharath Kumar Reddy, UG Students, Department of Mechanical, Bhuma Shobha Nagireddy Memorial College of Engineering and Technology, Allagadda, Andhra Pradesh, India
    UG Students, Department of Mechanical, Bhuma Shobha Nagireddy Memorial College of Engineering and Technology, Allagadda, Andhra Pradesh, India

Downloads

Published

2020-08-04

Issue

Vol. 6 No. 1 (2020)

Section

Articles