High-Performance FinFET Based 8T SRAM with Enhanced Performance Parameters Using Self-Controllable Voltage level (SVL) Technique

Authors

  • Nikhil Saxena Research Scholar, Department of Electronics and Communication Engineering, ITM University, Gwalior, India Assistant Professor, Department of Electronics and Communication Engineering, ITM University, Gwalior, India
  • Vaibhav Shrivastava Research Scholar, Department of Electronics and Communication Engineering, ITM University, Gwalior, India Assistant Professor, Department of Electronics and Communication Engineering, ITM University, Gwalior, India

Abstract

The scaling of standard single-gate bulk CMOS faces great challenge in the nanometer regime due to the severe short-channel effects (SCE) which causes significant increase in the leakage current. In this paper, a high-performance eight transistor (8T) SRAM has been proposed for reduction in leakage current and power consumption using double-gate FinFET with the proposed technique. Double gate FinFET has better SCEs performance compared to conventional CMOS. In this paper, a low-power 8T SRAM cell is designed with self-controllable voltage level (SVL) circuit for providing low power consumption and high performance. A self-controllable voltage level circuit can supply a maximum dc voltage when the load circuits are in active mode and it can also decrease the voltage supplied to a load circuit when the load circuit is in standby mode. This proposed technique significantly reduces the leakage current at a supply voltage of 0.9 V with a leakage reduction of value 0.46 nA in the leakage current of the circuit and provides high-performance SRAM cell. The following simulations have been done on SPICE tool on 32 nm technology. Keywords: FinFET, CMOS, SCE, SRAM, SVL

Published

2019-07-29

Issue

Section

Articles