SCADA-Based Multi-drilling Mechanism by Using Sensors and Logical Operation

Authors

  • Karmur Dharnannt Department of Electrical Engineering, Dr. Subhash Technical Campus, Junagadh, Gujarat, India
  • Joshi Chintan Department of Electrical Engineering, Dr. Subhash Technical Campus, Junagadh, Gujarat, India
  • Kodiyatar Satish Department of Electrical Engineering, Dr. Subhash Technical Campus, Junagadh, Gujarat, India
  • Dabhi Kajal Department of Electrical Engineering, Dr. Subhash Technical Campus, Junagadh, Gujarat, India
  • Bhakhar Harshad Department of Electrical Engineering, Dr. Subhash Technical Campus, Junagadh, Gujarat, India

DOI:

https://doi.org/10.37628/ijepst.v5i1.1016

Abstract

Our project is auto conveyor system for industrial application by using multi-drill mechanism with PC screen control. The multi-drilling machining process is proposed for a cycle of drilling. The cycle process starts when the start switch is pressed; if the linear motor is put in place of the drilling head, in home position and then the rotary drill is rotated to bring the first work pieces to desired position. Keywords: auto-conveyor system, multi-drilling, rotary drill, PC screen control

Downloads

Published

2019-08-07

Issue

Vol. 5 No. 1 (2019)

Section

Articles